ENRU RU
 
 
 
Home / Applications / Food / Packaging Solutions / Sleeving  

Sleeving

Sleevemaster 750 Tunnel


The ShrinkMaster 750 recirculatory hot air tunnel is ideal used for medium and high speed Tamper Evident sleeve shrinking on products ranging from jars to large tubs. These tunnels can fully revert the sleeve without appreciably heating the product and are therefore suitable for chilled and frozen foods. They take up only 750 mm of line length, making them amongst the most compact recirculating tunnels available.

 

    ADVANTAGES

  • Unique 2 zone digital controlled design
  • Ideal for hi-speed tamper-evident shrinking up to 12 kW energy
  • Can be used for simple and complicated decorative sleeves
  • Fully insulated & guarded stainless steel chassis
  • 4 fully adjustable directional fantail nozzels
  • Supplied complete with stainless steel fixed height stand
  • Complete with digital fully adjustable controls

 

Sleevemaster 1500 Tunnel


The ShrinkMaster 1500 Model is especially useful for shrinking primary sleeves or sleeve labels and comprises of 16 fully adjustable nozzles that profile the heat requirements of a particular job. Digital close temperature control and good carcass insulation make this an efficient solution to shrinking sleeve label applications.

 

    ADVANTAGES

  • Unique 1 zone digital air profi led design
  • Ideal for hi-speed tamper-evident shrinking up to 18 kW energy
  • Used for simple and complicated decorative full body sleeves
  • Fully insulated & guarded stainless steel chassis
  • 16 fully adjustable directional nozzles
  • Supplied complete with stainless steel fixed height stand
  • Complete with Digital fully adjustable controls

 

Sleevit Drape


The Sleevit Drape full body sleeve labelling applicator combines innovation with functionality to create a unique, full body primary decoration sleeve applicator.Capable of sleeving products from 20mm up to 100mm diameter at sleeve lengths from 50mm up to 300mm at speeds reaching 40 products per minute using Tamper Evident Applicators adapted to cut and apply full body sleeve labels.
 

    ADVANTAGES

  • Capable of reaching speeds up to 40ppm
  • Sleeve between 20mm to 100mm diameter
  • Sleeve Length 50mm to 300mm
  • Flexibility of sleeve length and apply position
  • Optional larger, front or rear column mounted reel holders for ease of reel change
  • Supplied with stainless steel stand


Sleevit HB



 
The Sleevit HB horizontal sleeve labelling applicator combines innovation with functionality to create a unique full body primary decoration sleeve applicator, which has the added benefit of incorporating a tamper evident feature.

Exceptional Sleevit technology has combined state of the art servo drive motors and PLC controlled logic, in a fully integrated, fully guarded system, for the application of a variety of products from 12mm to 15mm diameter range, with varying cut lengths up to 150mm.

 

    ADVANTAGES

  • Capable of reaching speeds up to 60ppm
  • 12mm to 15mm standard diameter range
  • Adjustable width to accommodate 85mm – 135mm products
  • Rotating shrink conveyor with two heating zones
  • Supplied complete with fully integral interlocking guards
  • Ideal for unstable products
  • Optional loading and unloading systems

 

Sleevit Jumbo


 
The Sleevit Jumbo tamper evident sleeve applicator combines innovation with functionality to create a unique tamper evident sleeve applicator capable of sleeving round, rectangular and square products up to 620mm in circumference at speeds reaching 60 products per minute.
 
Exceptional Sleevit technology has incorporated the PLC controlled logic, in a fully guarded system, for the application of a variety of products up to 310mm with products ranging from 1litre, 1.5lt and 2litre ice cream tubs, spreads and ready meals, etc.

 

    ADVANTAGES

  • Capable of reaching speeds up to 60ppm
  • Sleeve products upto 620mm circumference
  • Can be converted to apply lower speed full body applications
  • Flexibility of sleeve length and apply position
  • Optional larger, front or rear column mounted reel holders for ease of reel change
  • Supplied with stainless steel stand

 

Sleevit Lite



 

A unique compact low cost sleeve applicator designed specifi cally for the lower speed application. Capable of sleeving products from 20mm up to 104mm diameter at sleeve lengths from 20mm up to 50mm at speeds
reaching 60 products per minute.

 

    ADVANTAGES

  • Capable of reaching speeds up to 60ppm
  • Sleeve products upto 620mm circumference
  • Can be converted to apply lower speed full body applications
  • Flexibility of sleeve length and apply position
  • Optional larger, front or rear column mounted reel holders for ease of reel change
  • Supplied with stainless steel stand

 

  

Sleevit Lite Tunnel


 
ShrinkMaster Lite tunnels are adjustable in width so they can be mounted on Sleevit or customers conveyors and adjustable in height and angle to suit the product and sleeve position.
 
 

    ADVANTAGES

  • Ideal for low to medium speed tamper evident applications
  • Directional hot air shrinking upto 7.5kW
  • Fully insulated and guarded chasis
  • Fully adjustable air flow and temperature

Applicator Specifications:
 
■ From 20-104mm diameter products
■ 20mm -50mm long sleeves
■ Compact, economical low running cost
■ Max 13 amps/phase

 

Sleevemaster S2000 Steam Tunnel

 
The Sleevit S2000 Steam Tunnel is a cost effective steam shrink solutions, capable of shrinking from 20mm up to 100mm diameter at sleeve lengths from 20mm up to 300mm at speeds up to 200 products per minute.

Heating with steam reduces artwork distortion considerably, as the heat source is in intimate contact with the sleeve and shrinks all parts of the surface equally.
 
It also caters for a wider variety of container shapes including heavily “waisted” drinks containers, PET sleeves on PET bottles and the trend towards thinner sleeve materials. At the same time steam reduces the need to pre-heat glass and metal containers before sleeving.
 

    ADVANTAGES

  • Unique twin zone heating chambers
  • Ideal for full body primary decoration applications
  • Fully insulated stainless steel chassis
  • 12 heating areas split into 2 zones for complex shapes
  • Unique coaxially piped shrinking nozzels to minimise condensation
  • Virtually dry shrinking


 

Sleevemaster Plus


 

The SleeveMaster is capable of  sleeving products from 20mm up to 104mm diameter at sleeve lengths from 20mm up to 50mm at speeds reaching 300 products per minute.
 
The SleeveMaster comprises of two models; The BASIC range which is suitable for unprinted tamper evident sleeves at moderate speeds and the SleeveMaster+ range which includes power unwind and print registration options for high speed lines with printed sleeves.

 

    ADVANTAGES

  • Capable of reaching speeds up to 300ppm
  • Fully enclosed and interlocked guarding as standard.
  • Sleeve lengths 25mm-50mm
  • Optional larger, front or rear column mounted reel holders for ease of reel change
  • Flexibility of sleeve length and apply position
  • Can be converted to apply low speed full body application.


 

Moisture Removal System




The Accraply Moisture Removal System is designed for in-line use to remove moisture from the exterior surface of containers. This system is easily incorporated into any Accraply shrink sleeve system and is essential where sleeve application may be impeded by residual moisture. It can also be used whenever post-steam tunnel drying is desirable. Because it is an independent module, this system can be installed on any new or existing line, pre- or post-fill, and will remove filler overspill or process condensation as required.

 

    ADVANTAGES

  • The Accraply Moisture Removal System is designed to remove water or condensation from products either prior to sleeving or after exiting the shrink tunnel.
  • Compact design minimizes footprint
  • Stainless steel control panel
  • Unlimited postitional adjustment of air knife blades
  • Enclosed base enhances noise suppression
 
 

Modal VF350



The Accraply Shrink Sleeve Model VF350 is a vertically fed shrink sleeve label applicator designed for containers that are filled or empty; round, square, or oval; in glass, plastic, or metal. Sleeve materials made from PVC, PET/PETG, OPS, or PLA material can be run at thicknesses between 40 and 70 microns and applied to multi-shaped containers at speeds of up to 350 per minute, dependent upon the length of material to be applied.
 
The Model VF350 incorporates a patented fully-adjustable cutter assembly with low cost disposable blades that adjust from 30 mm up to 170 mm diameter, significantly reducing changeover time. It will accomodate material cut lengths from 30 mm to 300 mm with container diameters of 28 mm to168 mm and container heights up to 400 mm.
 

    ADVANTAGES

  • Shrink sleeve labels applied to round, oval or square containers
  • Speeds up to 350 containers per minute
  • Shrink sleeve labels applied to either empty or filled containers made of glass, plastic, metal, or paperboard
  • Quick "no-tools" adjustment for fast and easy product changeovers
  • Compact design minimizes footprint
  • Color touch screen operator interface with recipe storage for container and sleeve material combinations
  • For use with PVC, PET/PETG, OPS or PLA material from 40 to 70 microns thick